Stress-Strain Constitutive Material Models for Hybrid Steel Fiber Reinforced Concrete
Abstract
Recent advancements in fiber reinforced concrete (FRC) technology has led to the development of fibrous concrete composites, comprised of fibers with different material and/or geometry, commonly known as hybrid FRC. In one type of hybrid FRC composites, advantageous behaviors of fibers of the same material but with different geometries are gathered in a single FRC mix. The aim of this paper is to develop and validate stress-strain relationships for hybrid steel FRC composites. Six different steel FRC mixes are produced and characterization tests are conducted. Cube, cylindrical and beam specimens are produced for each characterization test corresponding to each of the Steel FRC (SFRC) composites. In this regard, an experimental program is performed to determine the basic engineering properties of SFRC composites using standard compressive, splitting tensile and three-point bending tests. The prescribed procedure of the RILEM guideline, originally developed for non-hybrid FRC, is followed using the obtained experimental results to develop stress-strain behavior models for the SFRC mixes. To validate results for the hybrid SFRC composites, numerical simulations of the 3-point bending tests were performed and compared to that of corresponding experimental results. The results indicated that the proposed stress-strain relationships yield acceptable results for characterizing the behavior of hybrid SFRC composites.
Copyright (c) 2020 Mohammad Jamshidi Avanaki, Mohammad Abedi, Abdollah Hoseini
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright of their work, with first publication rights granted to Tech Reviews Ltd.