Analysis of the Influence of New Combined Process "Equal Channel Angular Pressing-drawing" on the Microstructure and Properties of Deformed Wire

  • A. Naizabekov
  • S. Lezhnev
  • A. Volokitin
  • I. Volokitina
  • E. Panin
Keywords: pressing-drawing; combined process; structure; mechanical properties; wire

Abstract

This article is devoted to analysis of the influence of new combined process "Equal channel angular pressing-drawing" on the microstructure and properties of deformed wire. From the result of investigation, figures of microstructure of deformed wire after third cycle of deformation and graphs of mechanical properties were obtained. It is shown that proposed combined method of deformation of “pressing-drawing” has a significant advantage compared with the existing technology of wire production.

Published
2016-03-31
Section
Articles