Demolition of Reinforced Concrete by Steam Pressure Cracking System

Abstract

The authors developed an environment-friendly demolition mechanical system for a large reinforced concrete structure for an actual site. The steam pressure cracking agent (SPC, non-explosive) is a method that can safely and quickly separate concrete because it produces lesser vibration and sound than the blasting method, which uses explosives. The authors showed that the direction of cracking can be controlled by an induction hole. The principle of control is that the elastic wave of the compression stress generated from the SPC reaction changes to a tensile elastic wave at the induction hole, which initiates a crack. Furthermore, in the SPC method, a large amount of concrete powder generated by the explosion method was not produced, and there was no risk of secondary contamination by fine concrete powder. The area over which the crack propagated depends on the energy generated from the SPC. The relationship between the two is linear. For reinforced concrete, the energy of the SPC is used for both the destructive energy of the concrete and the energy of the cutting of the reinforcing steel bar, which quickly breaks with low energy. By applying an SPC to dismantle large reinforced concrete structures, controlled cracking can be achieved safely and quickly without any environmental pollution. A fracturing method using a SPC is an effective method for the decommissioning of nuclear power plants and the dismantling of concrete structures. In this report, we report a remote drilling system that can be used to remotely install loading holes and guiding holes for the SPC and perform effective controlled fracturing.